Πασσαλοπήκτης Klemm KR 702-2R

937 Machine Hours

Klemm KR 702-2R compact piling rig with separate pp117/129g power pack

• Undercarriage

Chain width: 200 mm

Length track unit: 1935 mm

Ground pressure: 7,14 N/cm²

Ground clear: 210 mm

Tramming force: 20 kN max.

Fully covered hydraulic valve banks and hose port on the back of the rig. Main hydraulic lines with quick coupling fittings. Central greasing ports for all maintenance greasing points. Changeable counter weights at the back of the rig

Hydraulic retracting track undercarriage type B00. Retracting range 750 – 1250 [mm]

2 front and two rear hydraulic jacks (±200 mm)

• Hydraulic kinematic range*

Mast erecting: 0°- 95° (from horizontal to vertical)

Mast tilt: ± 45° (left and right*)

Lateral mast lift: ± 250 mm up/down from track level

Spread track: 750 – 1250 mm

Telescopic mast: 2500 – 3500 mm (w/o cat head)

(* not all achievable positions are appropriate for drilling operations)

• Transport dimensions Rig

Total length: 3300 mm

Total width: 750 mm (without safety guard, clamp & retracted tracks)

Total height: 2250 mm

Operational weight: 5.2 ton

• Telescopic drill mast type L164 (2450)

Type L164 (lg. 2450 – 3450 mm) with cylinder feed and flyer feed chain

Total open length: 3450 mm

Closed length: 2450 mm

Mast stroke: 1500-2500mm

Total feed way max: 2500 mm

Feed force: 38 kN

Retracting force: 60 kN

Complete with feed sequence control and squared and toothed mast support foot

Pre equipped for HSE safety guard fitting with electric and mechanical interfaces and door cable connection

• Winch

1.0 tonne rope winch on cathead

Winch type EGO 110

Total mast height plus 445 mm

Steel rope: Ø8 mm

Rope capacity: 32 m

• Klemm rotary head type KH25

With two units of H35T two speed motors

Max torque: 24.4 kNm

Max speed: 89 rpm

Hose protection bar

M20 drive flange connection

Flat hosing and valve arrangement

Rope protection bar

Slide with hydraulic side shift function

4” grouting swivel with swan neck

• Klemm type I clamp

Clamping force : 196 kN

Clamping range : Ø 298 – 508 mm

Total width : 1436 mm

With chuck holders and chuck inserts for range 410-508mm

Complete with hoses, fittings, safety valves and rectifier valve and centralizer with centralizing inserts

• Radio Remote Control

HBC Spectrum 3 radio remote control for rig tramming and drilling operations. With two battery packs, mains plug charger and on board charging station 24V. Cable plug for emergency situation. One waist belt and one shoulder harness. Slewable control arm for HBC remote box.

L/W/H: 360/183/180mm

Weight: 3kg

• Pressure gauge box

With 4 units of pressure gauges for best operators view and with lockable vandalism protection cover mounted on height adjustable pole on the back of drilling unit

• Acoustic safety signal and 360 degree LED amber beacon for function driving, drilling unit and power pack.

View all Klemm Machines