Νέα Επικαθήμενο κουρτίνα HASTRAILER TENTELİ TREYLER

Chassis:

Chassis manufactured from S700MC (much stronger than ST52-3 steel) via submerged welding machine

Painting:

Steel-blasted SAE 2,5 norm blanc+ High zinc epoxy-based prime-coated + organic resin-based lining + acrylic final coat in colour RAL 7021 + oven dried.

Coupling:

Ø 2” (50.8 mm) coupling point conformant to SAE and DIN 74/08 Standards R55 Regulation.

Axles:

3 axles Brand SAF with a capacity of 9 tonnes and with 360mm air suspension with 120mm offset disc brake.

Automatic lifting system on the first axle = liftaxle

Landing Gears:

Telescopic SAF landing gears with 24 tonnes capacity and two speed landing gears painted in black

Brake System & Suspension:

EBS brake system with 2 modules and 2 sensors (2S/2M)

RSS (Road Stability Support) system compliant to ECE R13

Pneumatic brakes with double circuit

Suspension system with manuel lowering & lifting valves

Lighting System:

Lighting system with 24 Volt according to EC 76/756

Reflectors located on the sides and at rear according to ECE R 48

LED side, front and back marker lamps with reflectors

Rear marker lamps closed to the frame

Bulkhead division box with 2x7 pol DIN ISO 1185 and DIN ISO 3731 + 1x15 pol DIN ISO 12098

Tyres and Rims:

6+1 pieces Steel Rims with 120 offset

6+1 pieces of tyres 385/65 R 22.5 conformant to 458/2011 EU. Rims painted in silver RAL 9006.(A Brand choice of HASTRAILER)

Included Accessories of Chassis:

Foldable Side protection Anodised extruded aluminium profiles barriers conformant to ECE R 73

Rear bumper, made of steel, conformant to ECE R 58 .

Rear ramp rubber chock 2 pieces at left and right side.

Basket type double spare wheel holder on the back of the axle.

Spare wheel 385/65 R 22.5 , A-Brand same trailer. With steel rim

1 piece fire-extinguisher box.

Food box made of coated sheet metal.

1 piece 30 l water tank - CE certificated

Plastic document box.

2 yellow wheel chocks with holder.

Plastic tool box.

6 pieces of mud guards conformant to EC 109/2011 EU + 2 pieces of anti-spray mud guards

1 speed marker plate of 70-80 km/h in white and red colour, according to admission in European Countries.

Front Wall:

Standard height of the steel front wall is 2700 mm and front wall completely mounted with bolts & nuts.

Floor:

Durable to 7200 kg forklift axle load and covered with 30 mm plywood panel. Side board profiles produced with roll forming method from high quality steel S500MC and also have integrated binding rings 13x2 pieces.

Included Accessories of Body:

Fast opening and closing system with alumınıum profile, roof and side easy slidable, awning cover is high quality of 670g/m2. System has 3 + 3 stanchions and between them cover alumınıum planking profile and rear aluminum doors with 2x4 hinges and 2x2 integrated locking and bars. 2x4 Aluminum side boards, adjusted stanchions and rubber shocks full length – TIR execution regulation Body according TIR regulation.

Admission Plates:

Vehicle satisfies to the EC type-test with Certificate of Conformity (CoC).

Authorized in “REPUBLIC of TURKEY”

Two reflector plates vertically placed on the rear bumper (565x200 ECE-R70).

TIR PLATE and Reflektive Band according to ECE-R70

Additional options for body:

Coil gutter between longbeams after coupling section, reinforced of +/- 6000 mm with cover lids, for transport coils

2x4 Square stanchion holders for pools in the floor

Plywood cover for front wall.